Dynamic CS-ZD Conical Chem Stud / Zinc

CS-ZD Conical Stud Dynamic Zinc

The dynamic CS-ZD system involves both the an chem stud with conical expansion elements and a chemical injection anchor. The combination of these two elements provides extremely high load bearing capacity even at a minimum edge distance and spacing. Assembled with a special nut and filling washer to account for angular misalignment, this is a flexible system suitable for pre-installation or through fastening.

  • Approved in cracked and uncracked concrete under fatigue cyclic loading.
  • Low anchorage depths and component thickness.
  • For use in structures subject to dry internal conditions.
SKU 1CSZD
Availability:
Pack:
Sub-total: / ex. gst.
Description

Advantages:

  • High loads, if the number of load cycles is limited
  • The design can distinguished between static and non-static loads
  • No load reduction for wet or water filled drilled holes
  • Dill hole creation with hammer drill or hollow (dust-less) drill bit

 

*The optimum drill hole depth must be calculated with the actual fixture thickness (tfix).

Product List
SKU Description Availability List Price Pack
Pack:
More Information
More Information
Material Grade Carbon Steel
Coating & Plating Zinc Clear
Diameter / Gauge M12, M16, M20
For use with Concrete (cracked), Concrete (un-cracked), Masonry Solid Block
Setting Conditions Dustless Drilling, Hammer Drilling, Overhead, Pre-set
Approvals & Documents ETA Bonded Anchors, Fire Resistance, VOC Report
Compliance AS 5216:2021, Dynamic Loads, Greenstar, Seismic C1 & C2
Software AFOS® Anchor Design Software
Use for Critical Anchoring, Handrails & Balustrade, Internal or Confined Spaces, Machinery Assembly, Suspension & Gantry
Technical Information
SKU Dia. x Length Fixture, tfix [ min / max ] Drill Hole Depth*, ho Drill Dia Ø, do Studs Per 420ml Cartridge
1006.0120160 M12 x 160mm CS-ZD 12 / 25mm 130mm - tfix 14mm 31
1006.0120185 M12 x 185mm CS-ZD 12 / 50mm 155mm - tfix 14mm 25
1006.0160200 M16 x 200mm CS-ZD 16 / 30mm 163mm - tfix 18mm 19
1006.0160220 M16 x 220mm CS-ZD 16 / 50mm 183mm - tfix 18mm 16
1006.0200280 M20 x 280mm CS-ZD 20 / 50mm 230mm - tfix 24mm 8
1066.4200001 CS-D 420ml Chemical Injection
Documents