Quik Drive PRO300s

> Drives screws up to 75mm!

The Quik Drive® auto?feed screw driving system is an ideal solution to save time and effort when fastening subfloors, wall plates and decks to timber and steel joists. The auto-feed design uses collated screws to enable quick and easy fastening. The holding power of fasteners designed to be used in the Quik Drive® system reduce gaps that cause floor squeaks, screws also prevent fastener heads from popping up above the boards.

Auto-feed attachement can be used with or without the extension pole depending on your working position. The tool extension allows stand-up driving for more efficient positioning and installation of screws. Install above head or into flooring in high volume without strain.

Nose Clip for Decking

The decking nose clip positions the screw on the deck board and centers it on the joist for an easy, uniform installation from a standing position.The nose clip guides both a 3mm or a 5mm gap between decking boards.

Application

A wide range of collated screws are available to suit different applications, including:

• Timber-to-Timber or Timber-to-Steel Joists
• Subflooring-to-Timber
• Subflooring-to-Steel
• Fibre Cement-to-Timber
• Fibre Cement-to-Steel
• Decking Screws available in stainless steel
  
  

Kit Includes:

• Auto-feed attachment for driving 8g and 10g 4.2mm-4.9mm screws from 40mm to 75mm
• Extension pole (515mm)
• Makita Drywall Screw-driver
• Quiver for keeping screws at your finger tips
• Protective tool case

Quik Drive® is a a registred trademark of Simpson Strong-Tie Company Inc

For further details on the Quik Drive® system download the PDF from the bottom of this page.

PDF Download