XSAH-Z Long Concrete Anchors for Beams and Purlins

XSAH-Z Long Concrete Anchors for Beams and Purlins

X-SERIES  High Performance  ● ● ● ● ●

Ranging from 200 to 300mm in length these 10mm screw anchors can be used for timber beam to concrete wall connections. 

XSAH-Z screw-anchors are a versatile, high-performance concrete anchor that can cut a positive thread in the concrete when installed and enable attachment to be made to close to edge as a non-expanding anchor. The approved embedment’s enables subsequent alignment to compensate for unevenness.

SKU 1XSAHZ10
Availability:
Pack:
Sub-total: / ex. gst.
Description

Application

  • Anchor moderate to heavy loads in cracked and non-cracked concrete
  • Railings and handrails, shelves, wooden beams, supports and braces, brackets, pipeline and cable routes, suspended ceilings and more
  • Without assessment can be used in compression-resistant natural stone and solid brick

 

Advantages

  • European Technical Assessment (ETA) for anchoring in cracked and non-cracked concrete (Option 1) for concrete screws in sizes ø 10.
  • With up to 3 embedment depths, it is versatile for high loads or low levels of drilling and installation effort
  • Approved for use under seismic* conditions of category C1 & C2 (ø8 to ø14 for embedment depth hnom3)
  • Approved for use under fire exposure
  • Small drill hole diameter, small edge and axial gap
  • No curing times – can be loaded immediately
  • Adjustable to compensate for unevenness (Ø8 to Ø14 mm)
  • Can be fully removed

 

*For approved anchors in seismic conditions please see technical data sheet

Product List
SKU Description Availability List Price Pack
Pack:
More Information
More Information
Material Grade Carbon Steel
Head Type Hex Washer
Driver Type Hex Socket
For use with Concrete (cracked), Concrete (un-cracked), Hollow Core Concrete, Masonry Solid Block
Setting Conditions Hammer Drilling, Close to Edge, Overhead, Removable
Approvals & Documents ETA Certification, Fire Resistance
Compliance AS 5216:2021, Cyclic Loads, Seismic C1 & C2
Software AFOS® Anchor Design Software
Technical Information
SKU Item Rec Fix [ hnom1 ] Drv Item
1XSAHZ10200 10 x 200mm XSAH-Z 141mm 15mm 10 x 200mm XSAH-Z
1XSAHZ10240 10 x 240mm XSAH-Z 181mm 15mm 10 x 240mm XSAH-Z
1XSAHZ10280 10 x 280mm XSAH-Z 221mm 15mm 10 x 280mm XSAH-Z
1XSAHZ10320 10 x 320mm XSAH-Z 261mm 15mm 10 x 320mm XSAH-Z
Documents