X-Series Performance Screw-Anchors

Application

• Anchor moderate to heavy loads in cracked and non-cracked concrete
• Railings and handrails, shelves, wooden beams, supports and braces, brackets, pipeline and cable routes, suspended ceilings and more
• Without assessment can be used in compression-resistant natural stone and solid brick

Advantages

• European Technical Assessment (ETA) for anchoring in cracked and non-cracked concrete (Option 1) for concrete screws in sizes ø 6, 8, 10, 12 and 14
• With up to 3 embedment depths, it is versatile for high loads or low levels of drilling and installation effort
• Approved for use under seismic* conditions of category C1 & C2 (ø8 to ø14 for embedment depth h_nom3)
• Approved for use under fire exposure
• Small drill hole diameter, small edge and axial gap
• No curing times – can be loaded immediately
• Adjustable to compensate for unevenness (Ø8 to Ø14 mm)
• Can be fully removed

Installation

Embedment Depth 1 (h_nom1): low level of drilling and installation effort / large fixture thickness / reduced loads

Embedment Depth 2 (h_nom2): medium level of drilling and installation effort / medium fixture thickness / moderate load

Embedment Depth 3 (h_nom3): higher level of drilling and installation effort / small fixture thickness / heavy loads

AFOS: Need assistance when designing with NCC compliant anchors?  Get the latest software developed for engineers – specify the correct anchors to AS 5216.  Click here to find out more.

*For approved anchors in seismic conditions please see technical data sheet

Application

• Anchor moderate to heavy loads in cracked and non-cracked concrete
• Railings and handrails, shelves, wooden beams, supports and braces, brackets, pipeline and cable routes, suspended ceilings and more
• Without assessment can be used in compression-resistant natural stone and solid brick

Advantages

• European Technical Assessment (ETA) for anchoring in cracked and non-cracked concrete (Option 1)
• With up to variable embedment depths, it is versatile for high loads or low levels of drilling and installation effort
• Approved for use under seismic* conditions of category C1 for embedment depth h_nom3
• Approved for use under fire exposure
• Small drill hole diameter, small edge and axial gap
• No curing times – can be loaded immediately
• Can be fully removed

Installation

Embedment Depth 1 (h_nom1): low level of drilling and installation effort / large fixture thickness / reduced loads

Embedment Depth 2 (h_nom2): medium level of drilling and installation effort / medium fixture thickness / moderate load

Embedment Depth 3 (h_nom3): higher level of drilling and installation effort / small fixture thickness / heavy loads

AFOS: Need assistance when designing with NCC compliant anchors?  Get the latest software developed for engineers – specify the correct anchors to AS 5216.  Click here to find out more.

*For approved anchors in seismic conditions please see technical data sheet

Application

• Anchor moderate to heavy loads in cracked and non-cracked concrete
• Railings and handrails, shelves, wooden beams, supports and braces, brackets, pipeline and cable routes, suspended ceilings and more
• Without assessment can be used in compression-resistant natural stone and solid brick

Advantages

• European Technical Assessment (ETA) for anchoring in cracked and non-cracked concrete (Option 1) for concrete screws in sizes ø 6, 8, and 10
• With up to 3 embedment depths, it is versatile for high loads or low levels of drilling and installation effort
• Approved for use under seismic* conditions of category C1 (ø6 to ø10 for embedment depth h_nom3)
• Approved for use under fire exposure
• Small drill hole diameter, small edge and axial gap
• No curing times – can be loaded immediately
• Adjustable to compensate for unevenness (Ø8 - Ø10 mm)
• Can be fully removed

Installation

Embedment Depth 1 (h_nom1): low level of drilling and installation effort / large fixture thickness / reduced loads

Embedment Depth 2 (h_nom2): medium level of drilling and installation effort / medium fixture thickness / moderate load

Embedment Depth 3 (h_nom3): higher level of drilling and installation effort / small fixture thickness / heavy loads

AFOS: Need assistance when designing with NCC compliant anchors?  Get the latest software developed for engineers – specify the correct anchors to AS 5216.  Click here to find out more.

*For approved anchors in seismic conditions please see technical data sheet

Application

• Anchor moderate to heavy loads in cracked and non-cracked concrete
• Railings and handrails, shelves, wooden beams, supports and braces, brackets, pipeline and cable routes, suspended ceilings and more
• Without assessment can be used in compression-resistant natural stone and solid brick

Advantages

• European Technical Assessment (ETA) for anchoring in cracked and non-cracked concrete (Option 1)
• Approved for use under seismic* conditions of category C1 for embedment depth h_nom3
• Approved for use under fire exposure
• Small drill hole diameter, small edge and axial gap
• No curing times – can be loaded immediately
• Can be fully removed

AFOS: Need assistance when designing with NCC compliant anchors?  Get the latest software developed for engineers – specify the correct anchors to AS 5216.  Click here to find out more.

*For approved anchors in seismic conditions please see technical data sheet

Application

• Anchor moderate to heavy loads in cracked and non-cracked concrete
• Railings and handrails, shelves, wooden beams, supports and braces, brackets, pipeline and cable routes, suspended ceilings and more

Advantages

• European Technical Assessment (ETA) for anchoring in cracked and non-cracked concrete (Option 1)
• Approved for use under seismic conditions of category C1
• Approved for use under fire exposure
• Small drill hole diameter, small edge and axial gap
• No curing times – can be loaded immediately
• Can be fully removed

AFOS: Need assistance when designing with NCC compliant anchors?  Get the latest software developed for engineers – specify the correct anchors to AS 5216.  Click here to find out more.

*For approved anchors in seismic conditions please see technical data sheet